Model Overview and Options
AHR, AHS, AVR, AVR-XD
Packaged roof mounted or indoor mounted rotary air-to-air heat recovery ventilator featuring an AIRotor® Series–RTM heat wheel with standard effectiveness of 75% sensible and 65% latent. Suitable for large office buildings, schools, libraries, factories, hotels, etc.
AHR
Typical Applications: Ideal for indoor applications with over/under air flows.
cfm: 1,000 to 30,000
AHS
Typical Applications: Ideal for outdoor applications with side-by-side air flows.
cfm: 1,000 to 30,000AVR
Typical Applications: Ideal for indoor or outdoor applications with flexible side-by-side air flows.
cfm: 1,000 to 30,000AVR-XD
Typical Applications: Double wheel design ideal for high efficiency and dehumidification ap- plications.
cfm: 1,500 to 30,000
DXH, DXH-XD, DXH-AR
Custom packaged roof mounted or indoor mounted unit with air-to-air aluminum flat plate exchanger (Model XLTTM, standard) designed with pre-cooling and reheat combined with a cooling coil.
DXH
Typical Applications: Ideal design for cooling and dehumidification make-up air unit.
cfm: 1,500 to 18,000
DXH-XD
Typical Applications: Ideal design for cooling, dehumidification, and ventilation for commercial and industrial applications.
cfm: 1,500 to 10,000DXH-AR
Typical Applications: Ideal design for cooling, dehumidification, and high efficiency ventilation for commercial applications.
cfm: 1,000 to 22,000
HX
Packaged indoor mounted air-to-air heat recovery ventilator with double pass flat plate exchanger.
HX
Typical Applications: Ideal for indoor, custom residential, and small commercial applications.
cfm: 80 to 1,200
IAQ-D, IAQ-B
Packaged roof mounted or indoor mounted air-to-air heat recovery ventilator in a low profile design, simple and complete, capable of many options.
IAQ-D
Typical Applications: Ideal for smaller commercial applications with direct drive blowers.
cfm: 500 to 2,400- IAQ-B
Typical Applications: Ideal for smaller to mid-sized commercial applications with belt drive blowers.
cfm: 1,000 to 16,000
PXCH, PXCV, PXHR, PXHS
Custom packaged roof mounted or indoor mounted air-to-air heat recovery and dehumidification system using epoxy-coated aluminum flat plate exchanger.
PXCH
Typical Applications: Horizontal configuration, ideal for dehumidification and ventilation applications such as custom residential and commercial pools, hotels, and schools.
cfm: 1,000 to 9,000- PXCV
Typical Applications: Vertical configuration, ideal for dehumidification and ventilation applications such as custom residential and commercial pools, hotels, and schools.
cfm: 1,000 to 4,000
PXHR
Typical Applications: Ideal for indoor-mounted dehumidification applications such as commercial pools, hotels, and schools.
cfm: 1,000 to 60,000- PXHS
Typical Applications: Ideal for roof-mounted dehumidification applications such as commercial pools, hotels, and schools.
cfm: 1,000 to 60,000
XC
Indoor or outdoor mounted, simple, encased aluminum flat plate exchanger with options for filters, frost control.
XC
Typical Applications: Ideal for inline installation in other built-up or modular systems in commercial or industrial applications.
cfm: 500 to 100,000
XHR, XHS
Custom packaged roof mounted or indoor mounted air-to-air heat recovery ventilator with an aluminum flat plate exchanger with full options. Efficiencies of 65 to 75%.
XHR
Typical Applications: Ideal for wide range of commercial indoor applications where all servicing and maintenance is done on one side of the unit. Suitable for large office buildings, factories, water treatment plants, hotels, etc.
cfm: 1,000 to 60,000- XHS
Typical Applications: Ideal for wide range of commercial roof-mounted applications where all servicing and maintenance is done on the roof. Suitable for large office buildings, factories, water treatment plants, hotels, etc.
cfm: 1,000 to 60,000
XLR, XTR
High capacity packaged roof mount/indoor mount aluminum flat plate air- to-air heat recovery ventilator with 70 to 75% efficiency.
XLR
Typical Applications: Ideal for roof mounted applications with gas fired heating. Single ex- changer. Suitable for large office buildings, factories, water treatment plants, hotels, etc.
cfm: 3,500 to 22,000- XTR
Typical Applications: Ideal for roof mounted applications with gas fired heating. Double ex- changer. Suitable for large office buildings, factories, water treatment plants, hotels, etc.
cfm: 16,800 to 55,000
XVC
Custom packaged roof mounted or indoor mounted air-to-air heat recovery ventilator with an aluminum flat plate exchanger for efficiencies of 67 to 75%.
XVC
Typical Applications: Ideal for roof mounted applications with gas fired heating. Drain pan is mounted below the roof to prevent freezing. Suitable for large office buildings, factories, water treatment plants, hotels, etc.
cfm: 1,500 to 60,000
XVS
Ideal for indoor applications with floor or suspended installation (mechanical room, mezzanine) for easy servicing and access. Suit- able for offices, hotels, schools, pool areas, etc.
XVS
Typical Applications: Ideal for inline installation in other built-up or modular systems in commercial or industrial applications.
cfm: 550 to 6,000